•Do not overfill the blender. This could cause damage to the motor. The 3A fuse will blow if the blender is over loaded. Replace fuse and do not exceed the maximum recommended volumes. Refer to the operating chart.
•Do not blend or mill for longer than the time periods recommended in the operating chart.
•When using the blender or mill ensure the lid is in place before switching on and do not remove the lid until the blade has stopped rotating.
Electrical requirements
Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply which must be A.C.(Alternating current).
If the socket outlets in your home are not suitable for the plug supplied with this appliance the plug should be removed and the appropriate one fitted.
IMP0RTANT : THE PLUG REMOVED FROM THE MAINS LEAD, IF SEVERED, MUST BE DESTROYED AS A PLUG WITH A BARED FLEXIBLE CORD IS HAZARDOUS IF EN- GAGED INTO A LIVE SOCKET OUTLET.
Should the fuse in the 13 amp plug require replacement, a 3 amp BS1362 fuse must be fitted.
This appliance is a double insulated product and it does not require an earth.
Blender & mill use
Use your blender for soups, sauces, drinks, pates, mayonnaise, dressings etc.
Use your mill for milling herbs, nuts and coffee beans.
Features of your blender and mill attachment
Filler cap
Lid
Jug
Base unit
Cord storage
Control switch
Mill attachment jar
Mill attachment
3
