EB75179 MUK Rev 1_Instruction Booklet 17/12/2010 09:31 Page 5
Fitting the underblanket to the bed
•NOTE: This product can be used with any type of bedding including waterproof bed protectors.
•Use only as an underblanket and do not use above the occupant of the bed.
•The blanket must be secured to the mattress in the following manner. Place the blanket directly on the mattress and ensure that a space of
bottom edge of the blanket and mattress A.
•Place the underblanket directly onto the mattress. Making sure the control switch end is at the head of the bed, with the connector facing upwards.
•WARNING: Ensure the blanket is not folded, rucked or creased. When in use do not cover with pillows.
Fitting instructions
•Each blanket is fitted with 3 tie cords.
•Position the blanket on the bed ensuring the pillow area is clear.
•Do not stretch the cord too tightly. Allow some ‘give’ to avoid edge distortion. Ensure knots are not tied too tightly so that they can be undone easily.
•Pass the first tape ⁄ under the corner of the mattress.
•Thread up through the centre eyelet.
•Pass under the adjacent corner and tie off to opposite loop.
•Repeat for second tape ¤ at opposite end of the blanket.
•Pass the centre tape ‹ underneath the mattress and tie to opposite loop.
•If the tape is too long you can cut off the ends.
A
⁄
‹
¤
For details of other Morphy Richards products, please see our website: | 5 |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
