EB75179 MUK Rev 1_Instruction Booklet 17/12/2010 09:31 Page 6
B
HOW TO USE
1Ensure the blanket is fitted to
the bed correctly, see diagram
A.
2Plug the power lead into the closest socket, using an extension lead if needed to ensure that the lead is not stretched.
Preheating the bed
Move the heat setting on the control switch to heat level 3 or 4, depending on the level of the heat required. Allow approximately
In cold weather, all electric blankets will take longer to heat the bed to a comfortable temperature. Please allow for this.
All night use
NOTE: Blankets are perfectly safe to be used all night. However we recommend using the heat setting below.
Move the heat setting on the control switch to heat level 1 or 2.
•These settings will provide safe and comfortable heat to sleep on all night.
•These settings can be used to air the bed.
WARNING: Always ensure that the heat setting is moved to the OFF position when you get up the next day, or after airing the bed.
WASHING
INSTRUCTIONS
WARNING:
•Do NOT dry clean - 
•Do NOT iron - 
WARNING: Before washing or drying, ensure that you detach all the controls from the blanket.
•Measure the blanket so it can be stretched back to its original size whilst wet.
•NOTE: Please ensure the blanket is fully dry before use.
1Unplug the blanket from the power socket.
2Disconnect the control switch and cord from the blanket by lifting the locking lever over the
raised button and pulling apart
B.
Machine washing 
Only use a washing machine with a drum large enough to take the blanket without forcing it in.
•Wash on the wool setting at 40°C.
Hand washing
1Use a mild washing liquid or detergent and lukewarm water.
2Immerse the blanket in the water and allow to soak for
3Squeeze the soapy water through the fabric.
4Rinse the blanket thoroughly in cool water, gently squeezing the fabric.
WARNING: Do not wring
6 | UK Helpline 0844 871 0960 Ireland Helpline 1800 409 119 | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
