Morphy Richards Orb vacuum cleaner manual Cleaning the motor protection filter, Storage position

Cleaning the motor protection filter

The micro-filters must be cleaned everytime the dust container is emptied to remove the fine dust particles collected. This can be done by shaking them.

The motor protection filter ‰ is in the dust container compartment. With the dust container removed, lift out the filter holder, remove the filter and shake to clean G.

The exhaust filter · is located at the back the cleaner. To remove, press down the catch and pull the cover away to remove the holder H. Remove the filter from the holder and shake to clean. The filter can be washed in warm water but do not use detergent. Allow to dry naturally and ensure it is totally dry before replacing it.

IMPORTANT: Do not operate without micro filters fitted.

Storage position

When finished, you can store accessories by locating the tube storage clip into the slot on the underside of the cleaner as shown I.

G

‰

H

·

I