40725 rev3 14/8/06 14:03 Page 6
heavy material such as denim etc.
this occurs, the indicator light will flash and a beep will be heard.
E
The shot of steam can be used whilst dry ironing, providing there is water in the tank, and the temperature control is set
If it is left in the vertical position it will shut down after 8 minutes.
within the steam range.
Do not use shot of steam at temperatures below the steam range
Note: For optimum steam quality, do not operate the shot more than three times in succession.
To reactivate the iron gently shake it, the temperature indicator light will come on indicating the iron is warming up and wait for the iron to heat- up as normal.
LIFE LONG ANTI- SCALE SYSTEM
(certain models only)
F
Vertical steam
Hold the iron in a vertical position between 1cm and 2cm away from the item E. Press the shot of steam button fi, this will create vertical steam. This feature is especially useful for removing creases from hanging clothes, curtains, wall hanging, etc.
Note; For optimum steam quality, do not operate the shot more than three times in succession.
No drip system
Your iron is fitted with a no drip system which is designed to prevent water escaping from the soleplate when the iron is too cold.
During use, the no drip system may emit a loud click, particularly during
Auto shut-off
(certain models only)
If your iron is fitted with the auto
If the iron is left unattended in the horizontal position it will shut down after 1 minute. When
The life long
EMPTYING AND
STORING
When you have finished ironing,
unplug your iron. Ensure that G the steam to dry iron selector switch ⁄ is set at the position, lift up the fill cap and empty any remaining water out
of the filling hole F.
Do not store in the box, but in an upright position, so that any drops of water remaining cannot leak out and discolour the soleplate G.
Important: The flex can be damaged if wound too tightly around the iron after use. Make a loose loop with the flex and wrap it around the iron. The iron must be cool before winding the flex and storing on its heel.
MAINTENANCE
Self clean feature
1Half fill the iron with water.
2Place the iron on its heel.
3Connect to a mains supply outlet
4Turn the temperature dial to ‘MAX’ setting
5The pilot light will glow indicating the irons switched on.
6 | UK Helpline 0870 060 2615 Replacement Parts 0870 167 6646 Ireland Helpline 1800 | 6 |
409119