RN40854MUK Rev1_Instruction Booklet 15/09/2010 16:21 Page 6
D
Off / No steam
High steam setting
FEATURES OF YOUR IRON
Dry ironing
You can use your iron as a dry iron only. Make sure the variable steam control ‹ is set to the ‘O’ symbol D.
Any temperature setting may be used depending on the garment. The spray feature may be used, provided there is water in the tank (see ‘Filling’ section). You do not need to put any water in the tank when dry ironing only.
Steam boost F
Press the steam boost button ¤ to obtain a boost of extra steam for ironing out creases in heavy material such as denim etc.
The shot of steam can be used whilst dry ironing, providing there is water in the tank, and the temperature control is set within the steam range.
Do not use shot of steam at temperatures below the steam range shown on the control dial.
Note: For optimum steam quality, do not operate the shot more than three times in
E ⁄ | Water Spray E |
succession.
F ¤
Press the spray button ⁄ and aim the spray of water at stubborn creases. You can do this whilst dry ironing providing there is water in the tank. When using the water spray it may be necessary to push the button a few times to get the spray pump primed.
Variable steam
Fill the iron with water as described in ‘Filling’, page 5, and insert the plug into the electrical socket.
The steam output can be varied from low to high by moving the variable steam control. When using the iron at the bottom of the steam range (see steam range shown on page 4), the steam output should be adjusted to the low setting.
The steam facility should only
Vertical steam
Hold the iron in a vertical position between 1cm and 2cm away from the item G. Press the steam boost button ¤, this will create vertical steam. This feature is especially useful for removing creases from hanging clothes, curtains, wall hangings, etc.
Note; For optimum steam quality, do not operate the shot more than three times in succession.
Water system
Do not store the product with water in the tank as water may leak from the soleplate fl if you forget to turn the steam setting to the off position.
Remember to only turn the
Gbe used on garments which are suitable for ironing within the steam range.
steam selector switch ‹ to steam when the control dial is set to a temperature within the steam range.
Remember: the lower the temperature setting, the lower the steam setting.
6 | UK Helpline 0844 871 0960 Replacement Parts 0844 873 0726 Ireland Helpline 1800 409 119 | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
