Features Summary
55
The unit provides various programming features. Program the desired settings by referring to the
programming tables (p. 56–61).
1Press .
Display:
2Select the feature you wish to program.
For basic features (p. 56, 57):
Press or until the desired
feature is displayed.
For advanced features (p. 58–61):
Press or until the following is
displayed,
then press and press or
until the desired feature is displayed.
The current setting of the feature will be
displayed.
3Press or until the desired setting
is displayed.
This step may be slightly different
depending on the feature.
4Press .
The setting you selected is set, and the
next feature will be displayed.
5To exit programming,press .
MENU
SET
SET
ADVANCED MODE
PRESS SET
SYSTEM SET UP
PRESS NAVI.[IH]
MENU

Programming!

MENU SET

General programming method

Programming by entering the program code
number directly
You can select a feature by directly entering the
program code (# and 2-digit number) instead of
using or in step 2.
1. Press .
2. Press and the 2-digit code number.
3. Follow steps 3 to 5 above.
See programming tables for code numbers (p. 56–61).
MENU
To cancel programming
Press to exit the program.
MENU