Panasonic KX-FPC161 manual Copying, Making a copy, Start Stop Copy, To stop copying

Copying

Making a copy!

The unit can make single or multiple copies (up to 50).

1	Adjust the width of the document guides to
	the size of the document.
2	Insert the document (up to 10 pages) FACE
	DOWN until a single beep is heard and the
	unit grabs the document.
	Display:	!!!STANDARD
		PRESS NAVI.[+ -]
	● If necessary, press		or	repeatedly
	to select the desired resolution (see below).

Document guides

3 Press COPY .

NUMBER=1

COPY:PRESS START

NUMBER=1

OR PRESS NAVI. H

START STOP

COPY

●If necessary, enter the number of copies (up to 50).

4 Press START .

● The unit will start copying.

Note:

●Any transmittable document can be copied (p. 36).

To select the resolution

Select the desired resolution according to the type of document.

–FINE: For printed or typewritten originals with small printing.

–SUPER FINE: For originals with very small printing.

–PHOTO: For originals containing photographs, shaded drawings, etc.

●If you select “STANDARD”, copying will be done using “FINE” mode.

You can also select the resolution after pressing COPY in step 3.

1. Press 3 times.

Quick scan feature

With this feature, the unit can scan the document into memory before copying. This feature is helpful when you want to remove the document for other uses. To use this feature, activate feature #34 on page 59 and make a copy. After storing, the unit will print the document.

●If the document exceeds the memory capacity (p. 80), copying will be canceled and this feature will be turned off automatically.

To stop copying

Press STOP .

Display:

STANDARD [+ -] <NUMBER>H

2.Press or repeatedly to select the desired resolution.

52