13
Setup (Base Unit)
For fax advantage assistance, call 1-800-435-7329.
7Turn the “T” shaped gear (blue) in the
direction of the arrow.
Make sure that the ink film is
wrapped around the blue core
at least once.
Ink film
“T” shaped gear
(blue)
Note:
The ink film is completely safe to touch, and will not
rub off on your hands like carbon paper.
Slack Reverse
Tight
Correct Incorrect
Blue core
The ink film is not wrapped
around the blue core.
8Close the back cover securely by pushing
down on the dotted area at both ends ( ).
Close the front cover securely ( ).
The following will be displayed while the unit
is checking that there is no slack in the ink
film.
Display: PLEASE WAIT
2
1
Dotted area
Back cover
Front cover
Display
1
2
5For replacement only
Remove the stoppers and tags from the new
ink film. Find the “T” shaped gear (blue).
Tags
New ink film
“T” shaped gear (blue) Stopper
Stopper
6Insert the blue core of the front ink film roll
into the right slot of the unit ( ). Insert the
“T” shaped gear (blue) into the left slot of
the unit ( ).
Insert the rear ink film roll ( ).
3
2
1
2
1
3Right
slot
Blue core
“T” shaped
gear (blue)
Left
slot
Rear ink film roll
Front ink
film roll