Panasonic KX-FPC161 manual FAX only mode All calls are received as faxes, Activating FAX only mode

Receiving Faxes

FAX ONLY mode!

(all calls are received as faxes)

Activating FAX ONLY mode

1 Set feature #77 to “FAX ONLY” (p. 61).

	If the arrow (▼) is not shown on the right of
2 the display, turn it on by pressing
	AUTO ANSWER .
	● The display will show the number of rings
		before the unit answers a call in FAX
		ONLY mode.
				Display:		PICKUP	& RCV FAX
						AFTER	3 RINGS[±]
3	If you wish to change the ring setting, press
			or		until the desired number is

displayed, and press SET .

▼

ON

●When receiving calls, the unit will automatically answer all calls and only receive fax documents.

Note:

●If the arrow (▼) is already shown on the right of the display and you wish to change the ring setting, turn the arrow off once then on again by pressing

AUTO ANSWER and follow the instructions in step 3.

●This mode should not be used with a telephone line which is used for both phone calls and faxes. Fax communication will be attempted even if someone is trying to call you. We recommend the following setup.

Example:

Line 1

– Phone calls

Line 2

– Faxes

Only a fax machine is connected.

SET

AUTO ANSWER

45