Emptying the dust container
IMPORTANT: To obtain best results from your cleaner it is important to empty the dust container and clean the filters regularly, otherwise the airflow and suction power will be reduced. If the dust container is not full and performance deteriorates, first check if there are any blockages in the accessories or tubes. If these are clear, it is necessary to empty the dust container and clean the filter.
Step 1
Remove the hose by pressing in the clips and pulling the hose away from the hose inlet.
Step 2
Slide back the dust container release button ¤ and lift off the dust container using the folding handle.
Step 3
Holding the dust container over a
dustbin, grip the tabs on the back of the filter, pull to remove and empty out the dust.
3CLEAN THE FILTER before replacing, see page 7.
4Replace the clean filter, making sure that it is correctly fitted, then replace the dust container. Press down firmly until it clicks into position.
IMPORTANT: Do not operate your cleaner without the filters fitted.
6
