|
| Troubleshooting |
|
|
|
| Problems | Possible solutions |
|
|
|
| Power LED doesn't light up. | ∙ Check if the power switch is in the ON position |
|
| ∙ Make sure the power cord is properly connected |
|
|
|
| No screen image | ∙ Check if the power switch is in the ON position |
|
| ∙ Make sure the power cord is properly connected |
|
| ∙ Make sure the signal cable is securely connected |
|
| ∙ When the display is in use, it will automatically turn off to enter |
|
| the power saving mode. Please press any key to see if the |
|
| image resumes. |
| Abnormal colors are present | ∙ Please refer to the "Color Temperature" section to adjust the |
|
| RGB color or select a color temperature. |
| The image bounces or a wave | ∙ Remove any electrical device that may be causing electrical |
| pattern is present | interference. |
|
| ∙ Check the signal cable and make sure the pins are not bent. |
|
|
|
| The screen image is not | ∙ Press the Auto button to automatically optimize the display |
| centered or the size is incorrect | status. |
|
| ∙ Refer to the "Image Control section". |
|
|
|
16