Morphy Richards SpillMaster manual Getting the best from your new attachment, Safety devices

70330 rev1 19/6/08 10:15 Page 1

SpillMaster

Please read and keep these instructions

Getting the best from your new attachment...

Use

This product is intended for picking-up liquids only. Picking up solid objects may cause blockages in the nozzle. If blockages occur, please detach and clean the SpillMaster as directed.

Do not cover the bleed holes when holding the attachment, otherwise there may be a risk of the cleaner overheating.

The SpillMaster must be attached securely and firmly to the vacuum cleaner hose or hose handle. It may be necessary to use one of the attachment adaptors, supplied.

Safety devices

If the unit is tipped over in use, safety valves will operate to prevent water escaping, no pick-up will be possible once these valves have operated. The valves will remain closed until the unit is returned to it’s correct upright position and the suction is switched off. Similarly, if the unit is overfilled, a float valve will operate, preventing any further pick-up. The suction must be switched off and the tank emptied before re-use.

Filter

Regularly remove, clean and dry the filter.

Cleaning

Empty and rinse the product with clean lukewarm water after every use. Leave to dry upside down for at least 24 hours or until completely dry before re-assembling the top unit to the tank. Do not place in or near heating appliances to dry.

For replacement parts, help with using your Morphy Richards product,	VC70330 MUK Rev 1
problems and lots more, contact us by phone or through our website.
UK Helpline: 0844 871 0949
Replacement Parts: 0844 873 0715
Ireland Helpline: 1800 409 119

www.morphyrichards.com