70330 rev1 19/6/08 10:15 Page 6
J
K
L
CLEANING THE
SPILLMASTER
It is recommended that the SpillMaster is regularly cleaned to prevent any build up of residue.
Remove the filter by squeezing the two white areas with a finger and thumb and pull the white tab until the filter is clear of the product J.
Separate the SpillMaster into it’s two parts as described in the ‘Emptying the SpillMaster’ section.
Empty the contents of the base unit over a sink and then rinse the reservoir with lukewarm water to remove any residue.
Leave to dry upside down for at least 24 hours or until completely dry K.
HINTS & TIPS
(also see ‘Safety Features’)
•The SpillMaster can be used on all floor types but must only be used for liquid spills.
•It has not been designed to suck up solids. If any solids have accidentally been sucked up, follow the advice in the ‘Cleaning’ section.
•Hold the SpillMaster ensuring the bleed holes are not obstructed L. If the bleed holes are covered, this could result in your vacuum cleaner over heating.
•Do not attempt to overfill past the max fill line. If overfilled, the float safety
•If the float is activated, switch the vacuum cleaner off and empty the reservoir. The float will drop back into it’s original position.
•After use, empty the contents of the water tank, clean and dry the product fully.
•Regularly check that the filter is not blocked, dirty or damp. If the filter becomes dirty, rinse in lukewarm water and leave to dry fully before
•If the filter becomes damaged, it must be replaced. Call our helpline for replacement parts.
•When carrying the SpillMaster to the sink, ensure it is kept horizontal to prevent any spillage.
PRODUCT STORAGE
•When finished, do not store near any heat sources.
•Store in an upright, flat position.
•Only store when dry.
HELPLINE
If you have any difficulty with your appliance, do not hesitate to call us.
We are more likely to be able to help than the store from where you bought it.
Please have the following information ready to enable our staff to deal with your query quickly.
•Name of the product
•Model number as shown on the underside of the appliance.
•Serial number as shown on underside of the appliance.
UK Helpline | 0844 871 0949 |
Replacement Parts 0844 873 0715 | |
Ireland Helpline | 1800 409 119 |
6 | UK Helpline 0844 871 0949 Replacement Parts 0844 873 0715 Ireland Helpline 1800 409 119 |
