42271 rev4 30/7/08 15:56 Page 4
Components of your iron
⁄ fi
¤›
Location
Locate the steam generator horizontally on the iron rest plate of your ironing board (if large enough) or on a heat resistant stand at the same height as your ironing board or below it.
Always ensure the generator is on a firm surface when ironing.
fl‹
‡„
‚ | O | I |
Iron unit
⁄Steam button
¤Temperature control dial ‹ Sole plate
› Temperature indicator light fi Supply cord from base unit
Base unit
fl
‡ Water tank · Power cord
‚ Power switch with indicator light „ Boiler temperature indicator light
Steam Facility (certain models only)
‰Spray unit
ÂSpray bottle (20ml)
·Before use
Remove any protective sticker from the soleplate and the cabinet, if any.
Textiles and clothes are supposed to carry ironing instructions. If they don’t, you should follow the fabric guide on page 3, but be sure to test the temperature by ironing the hem of the garment or similar area first.
If you turn the control dial down from a hot setting to a cooler setting, wait until the iron temperature has stabilised before you continue ironing.
Filling
1Place the steam generator on a stable ironing board or table, with the iron resting on it’s stand.
2Remove the detachable water tank by sliding outwards A.
A
‰ | ‰ | 3 Remove the | B |
| cartridge by pulling |
| |
|
|
| |
|
| upwards B. |
|
| Â |
|
|
4
