Morphy Richards Storm pets cylinder vacuum cleaner Operating The Appliance Tools And Accessories

70313 rev3 3/7/06 13:59 Page 4

OPERATING THE APPLIANCE

TOOLS AND

ACCESSORIES

Standard floor nozzle

Ï

This nozzle is suitable for general purpose cleaning on a wide variety of floor coverings.

Turbo brush Î

This nozzle is suitable for cleaning and rejuvenating cut pile carpets and is ideal for picking up stubborn dirt and pet hairs.

Cleaning the turbo nozzle

The turbo nozzle should be regularly cleaned and any hairs or fibres wrapped around the

Standard accessories

Application

Curtains and delicate

fabrics

Textiles and upholstery

Shelves and

hard surfaces

Carpets and

other textile

floor coverings

(brushes up)

Settings for

heavy dirt and

smooth floors

(brushes down)

brush bar removed to maintain optimum performance.

Tool storage A

The upholstery nozzle Ò, and the crevice tool Ô and brush attachment  are stored in the internal storage compartment. Lift to open.

OPERATION

Suction hose B

Push the 360° rotating head on the suction hose È into the suction hose opening ¤ on the vacuum cleaner.

The appropriate cleaning tool can be attached directly to the other end of the suction hose or the telescopic metal tube can be used between the suction hose and the tool.

Switching on C

Always pull out the supply cable to its maximum length. Plug the appliance into the mains supply. Ensure that the variable power

control fi is set to minimum by turning the dial anti-clockwise as far as it will go. Push the on/off switch ‚ to start the motor. Turn the variable power dial clockwise to the desired power.

A

B

C

4	UK Helpline 0870 060 2604 Replacement Parts 0870 167 6635 Ireland Helpline 1800
	409119