Quick start
1Assemble the nozzle, tubes and hose as shown 
.
2Pull out the cable to it’s full length and plug in to the mains supply.
3Switch on by pressing the on/off variable power switch.
Accessories
1Fit the hose to the cleaner by inserting the hose end into the hose inlet. 
release button
Tools storage
The crevice tool, brush can be stored on the tubes for added convenience.
Product storage
When finished, you can store the vacuum cleaner as shown by inserting the hook on the floor nozzle into the slot on the cleaner body.
Controls
2To remove press the release button down on the hose and pull out.
3Attach the extension tubes 
to the handle end of the hose. The hose handle features an airflow control which can be adjusted as required.
4Attach the combination floor nozzle to the extension tubes. The floor nozzle 
has two levers for the two positions.
•Brush up for carpets, rugs etc.
•Brush down for hard floors, tiles etc.
5The other accessories include:
•Crevice tool 
for awkward places, behind radiators etc.
•Brush attachment 
for pelmets,
delicate objects etc which attaches to the crevice tool.
To alternate between the brush and crevice tool push the button down and slide.
4
Power
To switch the cleaner on press the on/ off variable power switch 
inwards. To switch off press the on/off
switch again.
The suction power can be adjusted using this
switch. Turn the switch to MinMax the desired level.
Suction may also be varied with the fingertip control on the handle.
Closed: full suction
Open: reduced suction
Automatic cable rewind
After use, unplug and press the cable rewind button 
to retract the cable.
WARNING: When using the cable rewind, always hold the plug as the cable will rewind quickly.
TOPO COMPACT VACUUM CLEANER | 4 | 31/5/02, 11:52 AM |
