73215 rev3 30/9/08 13:33 Page 6
F |
FILTERS
Cleaning the pleated filter
You should clean the pleated filter each time the product is emptied.
Washing the pleated filter
For total cleaning of the pleated filter, it should be washed with warm water with no detergents. Allow the filter to air dry.
G
1Use the small brush ï provided (located on the filter assembly) to remove any fluff from the outside of the mesh filter F.
2Rotate the mesh filter î clockwise to release the mesh filter and pleated filter í assembly from the filter holder G.
3Lift out the pleated filter í then empty out the dust from the mesh filter î into the bin.
IMPORTANT: The filter must be completely dry before
Motor protection filter
This cleaner is fitted with a motor protection filter.
IMPORTANT: NEVER USE THE VACUUM CLEANER WITHOUT THIS IN PLACE.
Cleaning the motor protection filter
H | 4 | |
by placing the pleated filter | ||
| ||
| inside the mesh filter, then place | |
| the filter holder on top in the | |
| correct position. Rotate the | |
| mesh filter assembly | |
| ||
| assembly together H. | |
| 5 Place the filter assembly back | |
| inside the dust canister, making | |
| sure the filter assembly is | |
| placed level and that the filter |
| holder seal is seated neatly. | |
I | ||
|
6
| If there is resistance when |
| you |
| the cleaner, remove and |
| carefully reseat the filter |
| assembly back into the |
J | canister, ensuring the filter |
assembly seal is located | |
| fully and neatly. |
1 Remove the filter from the filter grille J.
2Rinse the filter in luke warm water and dry the filter completely.
3Put the filter back into the filter grille and reassemble.
|
|
6 | UK Helpline 0844 871 0949 Replacement Parts 0844 873 0715 Ireland Helpline 1800 409 119 |
