Morphy Richards VC7341DMUK manual Adjusting Suction Power, Safety Cut-Outs

VC73410MUK Rev2_Instruction Booklet 11/03/2011 11:00 Page 7

2Press the On/Off 3-position switch ‰ to the

“I” position to turn the vacuum on for above-floor cleaning E and hold the handle ⁄ in one hand while you carry the Lift Away

canister around the home with the other hand

B.

Cleaning under furniture in Lift Away canister mode

This function is ideal for cleaning underneath low furniture.

1Separate the Lift Away canister ˜ from the motorised floor brush nozzle  by pressing the Lift Away canister release button Ï H1 on the side of the Lift Away canister, then

gently hold the motorised floor brush nozzle to the floor with your foot H2 and pull the Lift Away canister up.

2Press the extension tube release button ‚ I2 and pull the extension tube · up.

3Attach the end of the extension tube · to the motorised floor brush nozzle  K.

K

4Press the On/Off 3-position switch ‰ to the “I” position to turn the suction motor on E.

NOTE: The rotating brush bar Ú will not rotate in Lift Away canister mode.

5Tip the unit backwards to access under low furniture.

ADJUSTING SUCTION

POWER

When using the attachments, the suction may be too powerful, adjust the suction power by rotating the suction adjustment collar ‹ 90° anti-clockwise to open the valve to reduce suction L.

L

Suction

Release Collar

Rotate the collar clockwise to close the valve when you need high suction and for vacuuming floors.

SAFETY CUT-OUTS

If the cleaner overheats, a motor protection thermostat will automatically switch the motor off. If this happens, switch the cleaner off, unplug from the power supply and leave the cleaner to cool for at least 90 minutes. Check the airways for blockages, empty the dust canister and clean the filters before restarting.

If the rotating brush bar Ú becomes jammed, a safety cut-out will stop the brush and the indicator light Ò will change from green to red. If this happens, switch off and unplug the product. Disconnect the motorised floor brush nozzle and carefully remove the blockage.

For details of other Morphy Richards products, please see our website: 7