Motion Computing MotionTM C5 Mounting to a cart or mounting arm, To mount the C5 Docking Station

Mounting to a cart or mounting arm

Mounting the Docking Station to a cart or mounting arm requires a VESA-compatible mount to interface with the 75 mm VESA hole pattern on the bottom of the Docking Station.

For information about viewing angles of the Docking Station, see “Setting the viewing angle” on page 8.

To mount the C5 Docking Station

1.The C5 Docking Station includes four 75 mm VESA-compatible mounting holes. For specific mounting requirements for your wall mount, mounting arm, or cart, refer to your mounting equipment instructions.

2.If using a VESA mount, fasten the Docking Station to the VESA- compatible equipment with four M4 screws, 12 mm maximum length.

VESA mounting holes on the bottom of the Docking Station

English 3