Battery Use & Safety

Important: Handle and store batteries properly to avoid injury or

damage. Most battery issues arise from improper handling of batteries, and particularly from the continued use of damaged batteries.

DON’Ts

Don’t disassemble, crush, puncture, shred, or otherwise attempt to change the form of your battery.

Don’t let the phone or battery come in contact with water. Water can get into the phone’s circuits, leading to corrosion. If the phone and/or battery get wet, have them checked by your carrier or contact Motorola, even if they appear to be working properly.

Don’t allow the battery to touch metal objects. If metal objects, such as jewelry, stay in prolonged contact with the battery contact points, the battery could become very hot.

Don’t place your battery near a heat source. Excessive heat can damage the phone or the battery. High temperatures can cause the battery to swell, leak, or malfunction. Therefore:

Do not dry a wet or damp battery with an appliance or heat source, such as a hair dryer or microwave oven.

Avoid leaving your phone in your car in high temperatures.

DOs

Do avoid dropping the battery or phone. Dropping these items, especially on a hard surface, can potentially cause damage.

Do contact your service provider or Motorola if your phone or battery has been damaged from dropping or high temperatures.

Important: Use Motorola Original products for quality assurance and safeguards. To aid consumers in identifying authentic Motorola batteries from non-original or counterfeit batteries (that may not have adequate safety protection), Motorola provides holograms on its batteries. Consumers should confirm that any battery they purchase has a “Motorola Original” hologram.

Motorola recommends you always use Motorola-branded batteries and chargers. Motorola mobile devices are designed to work with Motorola batteries. If you see a message on your display such as Invalid Battery or Unable to Charge, take the following steps:

Remove the battery and inspect it to confirm that it has a “Motorola Original” hologram;

If there is no hologram, the battery is not a Motorola battery;

If there is a hologram, replace the battery and retry charging it;

If the message remains, contact a Motorola authorized service center.

56Battery Use & Safety

Page 58
Image 58
Motorola 68000202467-A manual Battery Use & Safety

68000202467-A specifications

The Motorola 68000 series microprocessor, specifically the 68000202467-A, stands out as a significant piece of technology in the evolution of computing. Launched in the late 1970s and gaining popularity in the 1980s, the Motorola 68000 series paved the way for many modern computing technologies. The 68000202467-A variant is known for its robust features that range from high computational efficiency to extensive compatibility with various systems.

One of the key characteristics of the 68000202467-A is its 32-bit architecture, which allows for a substantial amount of data processing per cycle compared to its predecessors. With a 16-bit data bus, the processor can interact efficiently with peripherals while maintaining compatibility with older systems. This dual feature of supporting both 16-bit and 32-bit operations made it appealing for a wide array of embedded applications and personal computers.

In terms of performance, the 68000202467-A operates at clock speeds that can reach up to 16 MHz. This speed, combined with a sophisticated instruction set, enables it to handle multiple tasks simultaneously, making it well-suited for multitasking operating systems. The 68000 has a large number of operational modes, which enhance its versatility for software developers.

The Motorola 68000 series also incorporates advanced technologies such as a 7-stage instruction pipeline, which contributes to processing efficiency. This pipelining allows subsequent instructions to be fetched while the current instruction is being executed, minimizing idle CPU time and maximizing throughput. Additionally, the processor supports various addressing modes, making it flexible for programmers to access data in memory.

Another notable aspect of the 68000202467-A is its built-in support for a vast range of development environments. With numerous software development kits and libraries available, developers could easily create applications tailored for both graphics and processing-intensive tasks. This capability turned the 68000 into a preferred choice for the gaming industry during its peak.

Overall, the Motorola 68000202467-A remains a pivotal component in the legacy of microprocessors. Its combination of architectural sophistication, performance capabilities, and compatibility positions it as a landmark in the journey of computing innovation. As technology continues to evolve, the contributions of the 68000 series are still acknowledged and studied, reminding us of how far we have come in microprocessor design and functionality.