Safety Instructions

! WARNING:

The rechargeable battery contains nickel and cadmium. Do not burn or puncture the battery. Like other batteries of this type, if it is burned or punctured, it could release toxic material, which could cause injury. Do not dispose of it in household garbage. For information about recycling or proper disposal, consult your local solid waste (garbage) collection or disposal organization.

■Read and understand all instructions in this booklet before using this product.

■

■

Observe all warnings and instructions marked on the product.

Do not use the product near water or when you are wet. If product comes in contact with any liquids, unplug the power cord immediately. Do not plug the product back in until it has dried thoroughly.

■Never push objects of any kind into this product through housing slots because the objects may touch hazardous voltage points or short out parts that could result in a risk of electric shock. Never spill liquid of any kind on the pocket phone.

■

■

Never place this product near or over a radiator or heat register.

Slots and openings in the housing and the back or bottom are provided for ventilation. To protect the housing from overheating, these openings must not be blocked or covered. Therefore, do not place the product on a bed, sofa, rug, or other similar surface. Also, do not place this product in an enclosed area unless proper ventilation is provided.

■Use only the correct power source. If you are not sure of the power supply to your location, consult your local power company.

■This product uses a 3-prong plus in continental US locations. Such plugs are designed for your safety. Do not attempt to defeat this purpose. If your wall outlet does not accept the plug, the outlet should be replaced by an electrician.

■Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by persons walking on it. Do not overload wall outlets as this can result in the risk of fire or electric shock. Do not staple or otherwise attach the power cord to building surfaces.

■

■

Use only the type of battery pack shipped with this product.

If you suspect a gas leak, report it immediately, but use a telephone away from the area in question. The telephone’s electrical contacts could generate a tiny spark. While unlikely, it is possible that this spark could ignite a heavy concentration of gas. This product is not approved for use in areas labeled by the Occupational Safety and Health Administration (OSHA) as “explosive environments.” Only “Explosive Atmosphere Telephones” may be used in such hazardous environments.

A-2Issue 3 October 1997

Page 34 Page 36
Page 35
Image 35
Motorola 9601 manual Safety Instructions
Page 34 Page 36

9601 specifications

The Motorola 9601 is a highly regarded digital signal processor (DSP) that has found its applications across various fields, including telecommunications, automotive systems, and consumer electronics. Introduced in the early 1990s, the 9601 was a part of Motorola's advanced chipset family designed to meet the growing demands of digital processing.

One of the main features of the Motorola 9601 is its efficient architecture, which enables it to execute complex algorithms with remarkable speed. The DSP is built on a modified Harvard architecture, allowing for simultaneous access to program instructions and data memories. This characteristic significantly enhances performance, enabling the processor to handle multiple tasks concurrently.

The Motorola 9601 is equipped with a 16-bit fixed-point arithmetic unit, which provides a balance between precision and processing speed. Its ability to perform high-speed mathematical calculations makes it ideal for real-time applications, such as audio processing and multimedia encoding. The processor supports multiple data formats, ensuring compatibility with a wide range of applications and systems.

The device operates at clock speeds of up to 40 MHz, allowing for rapid data processing. With a comprehensive instruction set, including support for multiply-accumulate operations, the 9601 can efficiently perform a variety of signal processing tasks. The DSP also features dedicated hardware for specific operations, which further accelerates processing times and reduces power consumption.

Another important characteristic of the Motorola 9601 is its extensive input/output (I/O) capabilities. It supports various communication protocols, making integration into different systems seamless. This flexibility is a key advantage, as it allows developers to design highly customized solutions tailored to specific processing needs.

The Motorola 9601 has also been designed with power efficiency in mind. With its low power consumption characteristics, it is suitable for battery-operated devices where energy conservation is critical. This feature was particularly advantageous during the evolution of portable electronics.

In summary, the Motorola 9601 remains a noteworthy DSP due to its high performance, flexible architecture, and energy-efficient design. With its combination of advanced features and versatile applications, it continues to be a valuable component for engineers and developers working in various digital signal processing domains.
Top Page Image Contents