About this Guide
This guide describes how to install and configure a Bluetooth connection between a Motorola A835 mobile and an HP iPAQ PDA running the Microsoft ® Pocket PC v4 (PPC 2003) operating system.
It also describes how to then connect to the Internet from your PDA using your 3 mobile as a modem.
This guide shows screens for the HP iPAQ h2210. The exact screens displayed depend on the iPAQ model and installed firmware version. For brevity, where these instructions refer to “PDA”, this means any HP iPAQ PDA running PPC 2003 unless stated otherwise.
Before you begin
Make sure you have:
∙A charged Motorola A835 mobile
∙An active 3G USIM card inserted into the Motorola A835 mobile
∙Turned the mobile off and then on again
∙The mobile is in Video Zone or Messaging Zone. In Video Zone the mobile network indicator displays the 3G symbol; in Messaging Zone the network indicator displays the 2.5G symbol
∙Performed a soft reset on the PDA
When connected to the Internet
When your PDA is connected to the Internet using your mobile as a modem:
∙You can make and receive voice and video calls on your mobile if you are not downloading or uploading data
∙If you are downloading or uploading data an incoming voice call will be diverted to your voicemail if your divert when busy setting is
∙Video calls will not connect if you are downloading or uploading data and callers will see an engaged message
2 | About this Guide |
