8-95
AP51xx>admin(network.wireless.radio)> set
Description:
Enables an access point Radio and defines the RF band of operation.
Syntax:
Example:
admin(network.wireless.radio)>set 11a disable
admin(network.wireless.radio)>set 11bg enable
admin(network.wireless.radio)>set mesh-base enable
admin(network.wireless.radio)>set mesh-max 11
admin(network.wireless.radio)>set mesh-client disable
admin(network.wireless.radio)>set mesh-timeout 1 45
admin(network.wireless.radio)>set mesh-wlan wlan1
admin(network.wireless.radio)>set dot11-auth shared-key-allowed
admin(network.wireless.radio)>show
Radio Configuration
Radio 1
Name : Radio 1
Radio Mode : enable
RF Band of Operation : 802.11b/g (2.4 GHz)
Wireless AP Configuration:
Base Bridge Mode : enable
Max Wireless AP Clients : 11
Client Bridge Mode : disable
Clitn Bridge WLAN : WLAN1
Mesh Connection Timeout : 45 sec.
Dot11 Auth Algorithm : shared-key-allowed
For information on configuring the Radio Configuration options available to the access point using the applet (GUI), see Setting the
WLAN’s Radio Configuration on page 5-51.
set 11a <mode> Enables or disables the access point’s 802.11a radio.
11bg <mode> Enables or disables the access point’s 802.11b/g radio.
mesh-base <mode> Enables or disables base bridge mode.
mesh-max Sets the maximum number of wireless bridge clients.
mesh-client <mode> Enables or Disables client bridge mode.
mesh-timeout <period> Sets the client bridge link timeout for the radio index..
mesh-wlan <name> Defines the client bridge WLAN name.
dot11-auth <auth-algorithm> Defines dot11 level authentication algorithm to either open-system-only ot
shared-key-allowed.