_Series Programming Quick Reference
To enter programming mode, press and hold Push to Talk and Qfor 3 seconds while turning the radio on. The radio beeps and displays k, the channel number flashes, and the frequency (indicated by l) and code (indicated by y) display alternately.
Set the
Channel*
Set the
Frequency
Set the
Interference
Eliminator
Code
Set
Available
Channels*
* CLS1410 Only
Press [ or ].
Press Suntil l displays. Press [or ]to change the frequency.
Press Suntil y displays.Press [or ] to change the code.
Press S until = displays. Press [ or ]to select number of available channels.
