SCAN
4 Dto select | SYS SCAN |
The display shows the current scan status.
5 Gor Huntil SCAN ON
6Dto select the current setting.
STOP SYSTEM SCAN
Press the preprogrammed Scan button to stop System Scan (see page 14).
– or –
1Dto enter menu mode.
2 | Gor Huntil | SYS | SCAN |
3 | Dto select | SYS | SCAN |
The display shows the current scan status.
4 Gor Huntil SCAN OFF
5Dto select the current setting.
•The Gsymbol disappears from the display.
28
Note: Your dealer/programmer can preprogram your radio when exiting System Scan to automatically revert to the last scan channel that had activity on it or to automatically revert to the channel where scan was initiated.
START AUTO SCAN G
Auto Scan automatically starts scanning once a channel with Auto Scan enabled is selected.
Gor Hto select a channel that has been preprogrammed for Auto Scan by your dealer/ programmer.
STOP AUTO SCAN
Gor Hto select a channel that has not been preprogrammed for Auto Scan by your dealer/ programmer.
• The Gsymbol disappears from the display.
English
