SCAN
Your radio is equipped with the Scan feature, which allows you to monitor multiple channels for voice activity. The radio will stop on a channel when it detects activity on it.
Your radio automatically switches to a channel within the scan list when it detects activity.
The LED indicator blinks green during a scan operation and stops blinking when the radio switches to a channel.
There are two types of Scan available in your radio:
•System Scan
•Auto Scan
TALKBACK
The Talkback feature allows you to respond to a transmission while scanning. If a transmission is detected on a channel while scanning, the radio will stop on that channel for a default period of time after activity has ceased. This is referred to as “hangtime”. During this hangtime you may respond by pressing the PTT button.
Note: The LED scan indicator stops blinking while the radio is in hangtime. If the PTT button is not pressed during the preprogrammed hangtime, the radio returns to scanning channels.
STARTING SYSTEM SCAN
Press the preprogrammed Scan button (see page 14).
STOPPING SYSTEM SCAN
Press the preprogrammed Scan button.
STARTING AUTO SCAN
Auto Scan automatically starts scanning once a channel with Auto Scan enabled is selected.
Select the channel that your dealer has preprogrammed for Auto Scan.
STOPPING AUTO SCAN
Select a channel that has not been preprogrammed for Auto Scan.
31
SCAN
English
