GETTING STARTED
DESKTOP CHARGERS
Rapid Charger
1Turn the radio off.
2Place the battery, with or without the radio, in the charger pocket.
•The charger LED indicates the charging progress.
LED color | Status |
|
|
No LED Indication | Battery inserted incorrectly |
| or battery not detected. |
|
|
Single Green Flash | Successful charger |
| |
|
|
Flashing Red* | Battery unchargeable or not |
| making proper contact. |
|
|
Steady Red | Battery is in Rapid charge |
| mode. |
|
|
Flashing Yellow | Battery in charger but wait- |
| ing to be charged. The bat- |
| tery temperature may be too |
| hot or too cold. The voltage |
| may be lower than the pre- |
| determined threshold level |
| for charging. |
|
|
18 |
|
LED color | Status |
|
|
Flashing Green† | Battery 90% (or more) |
| charged. Trickle charging. |
|
|
Green | Battery fully charged. |
|
|
*Remove the battery from the charger and use a pencil eraser to clean the three metal contacts at the back of the battery. Place the battery back into the charger. If the LED
indicator continues to flash red, replace the battery.
†A standard battery may require 90 minutes to charge to 90% capacity. Even though new batteries might prematurely indicate a full charge (steady green LED), charge the battery for 14 to 16 hours prior to initial use for best performance.
A list of Motorola authorized batteries and battery chargers appears on page 35. The listed chargers will charge only Motorola authorized batteries. Other batteries may not charge.
English
