The
1 PTT Switch |
| 4 |
|
Press this switch to transmit, and release it to receive. |
|
| |
2 [ACC]/[P]/[P1]/[P2] Buttons |
|
|
|
[ACC] button: Press this button to switch the “Main” |
|
| 3 |
band between the “Left” and “Right” displays on the | 1 |
| |
|
| ||
LCD screen. This is the best and easiest way to set |
|
|
|
the “Main” band to the side you prefer. |
|
|
|
Pressing and holding in this button for 1/2 second moves |
|
| |
operation to the |
| 2 | |
band. |
|
| |
|
|
| |
[P] button: Press this button momentarily to switch the fre- |
|
| |
| CONDENSER MIC |
| |
quency control for the “Main” band between the VFO and |
| ||
|
| ||
Memory Systems. |
|
|
|
When the “Main” band is set to the VFO mode, press and hold in this |
|
| |
button for 1/2 second to activate the Smart Search Feature. |
|
| |
When the “Main” band is set to the Memory mode, press and hold |
|
| |
in this button for 1/2 second to activates the “Memory Bank” feature. |
| ||
[P1] button: Pressing this button repeatedly allows selection of the CTCSS or DCS mode | |||
on the “Main” band. The selections available are:
ENC ENC.DEC (Tone Squelch) DCS OFF ENC ......
[P2] button: Press this button momentarily to select the transmitter power output level on the “Main” band (“LOW,” “MID2,” “MID1,” or “HIGH”).
When the “Main” band is set to the Memory mode or Home Channel, press and hold in this key for 1/2 second to switch the memory channel display between the “Frequency” format and
You can reprogram the [ACC], [P], [P1], and [P2] buttons for other functions, if desired. See page 53 for details.
3 LOCK Switch
This switch locks out the Microphone buttons (except for the keypad and PTT switch).
4[UP]/[DWN] Button
Press (or hold in) either of these buttons to tune (or scan up or down) the operating frequency or through the memory channels on the “Main” band. In many ways, these buttons emulate the function of the (rotary) “Main” band DIAL knob.
Notice: If you change the microphone from the
19 |