Motorola DCT2500, DCT2000 user manual Getting Started, About the remote control, Dvr/Hdtv Hdtv Only

Getting Started

This section describes how to use the remote control to turn on the TV, receiver and VCR, as well as display and use the channel banner and Program Guide.

About the remote control

Your Cox Digital Cable smart remote allows you to control not only your receiver, but also your TV, VCR and audio component. For information on programming your remote, please refer to the user manual that you received with your remote. Simply press the button on your remote for the component you want to use, then whatever function keys you desire. The remote will “remember” which component you want to operate until you tell it differently.

For example, if you want to turn the VCR on and play a tape, simply press the VCR button on the remote, then the power button, then use the remote keys to control the VCR. (Remember that many of the VCR function keys— like Play, Stop, Rewind—may be hidden under a sliding compartment in some models.) When you’re done using the VCR and want to return to watching Cox Digital Cable, simply press the CABLE button on the remote and return to normal use. (Always remember to point the remote at the receiver if you are using it to control Cox Digital Cable.)

Your remote may vary slightly, but basic functionality is the same. See the following remote control diagrams on page 10 to reference the remote model that you have.

DIGITAL USER MANUAL

DVR/HDTV

HDTV ONLY

27