DCT6200/DCT6208 User Guide
Connecting a Stereo TV, VCR, and DVD
This cable configuration may be used for a mono or stereo VCR, because the VCR audio and video jacks are not used.
If your TV supports multiple sets of video and audio inputs (such as VID1, VID2, etc.), see the diagram Connecting a Stereo TV and Stereo VCR to connect your DCT*, VCR and TV. When you have completed those connections, refer to the diagram illustrated here to connect your DVD to your TV.
1Connect an RF coaxial cable to the cable wall outlet and the CABLE IN connector on the DCT*.
2Connect an RF coaxial cable to the TO TV/VCR connector on the DCT* and the CABLE/ANTENNA IN connector on the VCR.
3Connect an RF coaxial cable to the TO TV connector on the VCR and the CABLE/ANTENNA IN connector on the stereo TV.
4Connect a stereo audio cable to the INPUT AUDIO LEFT and RIGHT connectors on the stereo TV and the AUDIO OUT ANALOG R and L connectors on the DVD.
5Connect a video cable to the INPUT VIDEO connector on the stereo TV and the VIDEO OUT VIDEO connector on the DVD.
Or
Connect an
The video connection method illustrated here does not support high definition video. For more information, see “Connecting your DCT* to an HDTV – Video Only” on page 16.
29