DCT6200/DCT6208 User Guide
Connecting an A/V Receiver, TV, and VCR
1Connect an RF coaxial cable to the cable wall outlet and the CABLE IN connector on the DCT*.
2Connect a stereo audio cable to the AUDIO OUT R and L connectors on the DCT* and the INPUT R and L connectors on the A/V receiver.
3Connect a video cable to the VIDEO OUT connector on the DCT* and the CABLE/TV VIDEO connector on the A/V receiver.
4Connect a stereo audio cable to the VCR AUDIO OUT R and L connectors on the A/V receiver and the INPUT AUDIO R and L connectors on the stereo VCR.
5Connect a stereo audio cable to the OUTPUT AUDIO OUT R and L connectors on the stereo VCR and the VCR AUDIO IN R and L connectors on the A/V receiver.
6Connect a video cable to the INPUT VIDEO connector on the stereo VCR and the VIDEO VCR OUT connector on the A/V receiver.
7Connect a video cable to the OUTPUT VIDEO connector on the stereo VCR and the VIDEO VCR IN connector on the A/V receiver.
8Connect a video cable to the INPUT VIDEO connector on the stereo TV and the TV/MONITOR OUTPUT video connector on the A/V receiver.
If your equipment supports it, the optical (OPTICAL SPDIF) or coaxial
(SPDIF) audio outputs may be used in place of the stereo audio outputs
(AUDIO R and L). In most cases these outputs offer a higher level of audio quality, including support for 5.1 surround sound.
If your equipment supports it,
The optional connections marked with an * allow you to use the DCT* and TV without
•Connect an RF coaxial cable to the TO TV/VCR connector on the DCT* and the CABLE/ANTENNA IN connector on the stereo VCR.
•Connect an RF coaxial cable to the TO TV connector on the stereo VCR and the CABLE/ANTENNA IN connector on the stereo TV.
The video connection method does not support high definition video. For more information, see “Connecting your DCT* to an HDTV – Video Only” on page 16.
27