Problem | Possible Solution |
There is no video | Verify that the TV is powered on and set to the |
on the TV screen | appropriate input source for the DCT*. |
| Verify that the DCT* is powered on and tuned to an |
| authorized cable channel. |
| Verify that all video cables between the DCT* and the TV |
| are firmly connected. |
| Verify that the coaxial cable feed is firmly connected to |
| the DCT* and the wall jack. |
| The DCT* DVI output may not yet be enabled. Use the |
| component video (YPbPr) output instead. |
| If the DCT* video output is connected to a home theater |
| unit, verify that the home theater unit is powered on and |
| set to the appropriate input source. |
| If the DCT* video output is connected to a TV through a |
| DVI connection, power off the TV and then power off the |
| DCT*. Wait one second and then power on the devices. |
Not all HDTVs can display every output format (1080i, 720p, 480p, or 480i) available on the DCT*. To select a different format:
1Ensure that your DCT* is plugged into a power
outlet and is turned off.
2Press the MENU key on the front panel. Your settings are displayed on the DCT* front panel
display.
3Press the ▲ and ▼ keys to display the DVI/YPbPr OUTPUT setting.
4Press the ► key to cycle through the available output formats until a picture displays on the TV.
34