Motorola H670 manual Earhooks and Your Wearing, Headset, Changing Volume, Conformance Statement

EARHOOKS AND YOUR			WEARING THE
HEADSET			HEADSET
Your H670 headset is supplied with multiple		Once you have attached your desired
earhooks. The earhook is attached onto a hinge pin,		earhook, follow these steps to wear your
and is placed onto your ear when using your		headset on your ear:
headset. To install an earhook on your headset:		1	Open the attached	1
1 Open the attached
			earhook 45 degrees from
earhook 90 degrees from			the headset.
the headset.
		2	Loop the earhook over
2 Gently lift and pull the
			your ear.
top of the earhook up		3	Press earhook to your ear.
and off the upper hinge	1 Open Earhook			2
pin. Then, pull it away to
			When worn, your headset
remove it.	2 Pull Earhook Up			3
3 Position the headset for			will look like this on your
	Hinge Pin		head:
right or left ear use (right
ear use is displayed).

4 Hook the bottom of the earhook onto the lower hinge pin, then lift and pull the top of the earhook over the upper hinge pin.

CHANGING VOLUME				European Union Directives
BUTTON ORIENTATION				Conformance Statement
You can also change the orientation of the					Hereby, Motorola declares that this
					product is in compliance with:
volume buttons on your headset.		• The essential requirements and
1 Turn the headset power off.			other relevant provisions of Directive
			1999/5/EC.
2 Press and hold the Volume button you		• All other relevant EU Directives.
want to assign as the "volume up" button
and slide the switch toward the
microphone. The indicator light is either
steadily lit or flashing in blue.						Product
						Approval
						Number
Volume		The above gives an example of a typical Product
		Approval Number.
Buttons	Slide	You can view your product’s Declaration of Conformity
	Switch
		(DoC) to Directive 1999/5/EC (to R&TTE Directive) at
		www.motorola.com/rtte. To find your DoC, enter the
		product Approval Number from your product’s label in
		the “Search” bar on the web site.