Motorola quick start Econd PHONE?, Tips for Using H710, With TWO Phones, Audio Devices

USING A SE	ECOND PHONE?
Multipoint technology allows you to make and	2 Use your first phone to connect to your
receive calls from two Bluetooth enabled	headset.
devices like your personal and business phones.	a On your Motorola phone, press M (Menu)
To pair a second phone to your headset, follow	> Settings > Connection > Bluetooth Link >
these steps:	Audio Devices.
1 Turn off any phones or devices that are
	The phone lists Bluetooth devices it finds.
already paired with your headset.
	b Select Motorola H710.
2 Turn off your headset by closing the headset
boom.	c Select OK or Yes.
3 Perform Step 2 (“Start Bluetooth Feature”),
	Your headset is now connected to both
and Step 3 (”Pair”), and Step 4 (”Test and
Use”) to pair your headset with your second	phones. The last paired phone (your second
phone.	phone) is now your primary phone for voice
To reconnect your headset with your first phone	dial functionality.
	After you have successfully paired both phones
(and thus be connected to both phones), follow
	with your headset, you don't need to repeat
these steps:
	these steps. For daily use, ensure that your
1 Turn on first phone.
	headset is turned ON and that your phone's
	Bluetooth feature is ON.

		TROUBLESHOOTING
	TIPS FOR USING H710
		My headset will not enter pairing mode.
	WITH TWO PHONES
		headset are turned off. If the indicator light is flashing in blue,
		Make sure that any devices previously paired with the
Use the following tips when using H710's		first turn off the other device, then close and reopen the
multipoint technology:		headset boom. The indicator light becomes steadily lit in
		blue indicating the headset is now in pairing mode.
●	Incoming calls can be answered from both	My phone doesn't find my headset.
	phones:	Make sure the indicator light on your headset is on (lit in
	– When answering a call, the idle phone is	blue) and steady when your phone is searching for devices
		(see step 3).
	disconnected from the headset.
		My headset worked before but now it's not working.
	– When the call ends, the idle phone is
		Make sure your phone is on and the Bluetooth feature is
	automatically reconnected to the headset.
		turned on in your phone (see step 2). If the Bluetooth feature
●	Last number redial dials the last outgoing call	was turned off or was turned on only temporarily, you may
		need to restart the Bluetooth feature (see step 2) and pair
	made from either phone.	your phone and headset again (see step 3).
●	Voice dial is accessible from either phone via	My headset will not pair with my phone.
	different key actions:	Open the boom flip. Press and hold both Volume buttons
		and the Call button for more than 10 seconds. The indicator
	– For your primary device (last paired	light flashes blue 3 times and then become steadily lit. The
	phone), tap the Call button until you hear	headset is now in pairing mode (see step 3B) to complete
	the tone.	the pairing process.
	– For your secondary device (other paired	Support.
	phone), tap the Call button and either	If you need more help, contact us at
	Volume button until you hear the tone.	1-877-MOTOBLU or visit us at
		www.hellomoto.com/Bluetoothsupport