Motorola H710 quick start Changing Volume Quick Battery Button Orientation Check, Making Calls

CHANGING VOLUME			QUICK BATTERY
BUTTON ORIENTATION			CHECK
You can also change the orientation of the			When not in a call, open the boom to check
volume buttons on your headset.
			your headset's battery charge level by
1 Close the boom to turn the headset off.			pressing and holding both Volume buttons.
2 Press and hold down the desired			The indicator light displays charge status
"volume up" button and open the boom.			until you release the buttons. See below for
			details on indicator light and available talk
Keep the button pressed until the
			time based on charge status.
indicator light flashes blue three times.
			Headset Indicator	Available Talk Time
Volume	Call	Red		Less than 2 hours
Buttons		Yellow		2 to 4.5 hours
	Button
		Green		Up to 6.5 hours

European Union Directives	MAKING CALLS
Conformance Statement
	Function	Action
Hereby, Motorola declares that	Make a voice dial call	Tap the Call button
this product is in compliance	(Primary phone)	and speak the
with:
		name after the tone
• The essential requirements and
other relevant provisions of Directive	Make a voice dial call	Tap the Call button
1999/5/EC.
	(Secondary phone)	and either Voume
• All other relevant EU Directives.		button and speak the
		name after the tone
	End a call	Tap the Call button,
Product		and hear a
		high-to-low tone
Approval
Number	Answer a call	Open the boom or tap
The above gives an example of a typical Product		the call button (if
Approval Number.		boom is ready open),
You can view your product’s Declaration of		hear the ring tone,
Conformity (DoC) to Directive 1999/5/EC (to R&TTE		then a low-to-high
Directive) at www.motorola.com/rtte. To find your		tone
DoC, enter the product Approval Number from your
product’s label in the “Search” bar on the web site.	Reject a call	Press and hold either
		Volume button until
		you hear a tone
	Note: Some features are phone/network dependent.