Motorola i450 Using a Headset, Attaching a Headset, Using a Remote BoostTM Walkie-Talkie Button

Using a Headset

If you use a headset or similar device with your phone, you can set your phone to send incoming sound to the headset only, or to the headset and the speaker at the same time:

1From the main menu, select Settings > Advanced > Headset/Spkr.

2Select HdsetOnly to send incoming sound to the headset only. -or-

Select Hdset&Spkr to send incoming sound to the headset and ring tones to the speaker.

Note: If you are using your phone with a headset, and you have the Flip to End option set to On, closing your flip sends incoming sound to the headset and does not end the call. See “Setting Flip Actions” on page 47.

Attaching a Headset

1Lift the audio jack cover.

2Insert the headset connector firmly into the audio jack. You may have to rotate the headset connector until it fits securely into the audio jack.

Using a Remote BoostTM Walkie-Talkie Button

If you are using a headset or other accessory with a remote BoostTM walkie-talkie button, you can use the remote BoostTM walkie-talkie button for phone calls and BoostTM walkie-talkie calls.

For phone calls, use the remote BoostTM walkie-talkie button to answer calls, switch between calls, and end calls. Hold the remote BoostTM walkie-talkie button for less than 2 seconds to answer calls and switch between calls. Hold the remote BoostTM walkie-talkie button for more than 2 seconds to end calls.

For BoostTM walkie-talkie calls, use the remote BoostTM walkie-talkie button as you would the BoostTM walkie-talkie button on your phone.

136