Motorola i690 manual Making and Receiving Code Calls in MOTOtalk, Receive All, MOTOtalkTM

MOTOtalkTM

Making and Receiving Code Calls in MOTOtalk

To make a code call in MOTOtalk:

1Press and hold the PTT button. MT Transmit appears on the first line of display. Begin speaking after your phone emits the MOTOtalk tone.

2Release the PTT button to listen.

The tone emitted from your phone when using MOTOtalk is 4 beeps and sounds different from the standard tone heard with on-network Private and group calls.

If you receive an error message:

•There may be no parties on your channel or code.

•You are out of range.

When you receive a code call using MOTOtalk, MT Receive appears on the first line of the display.

Note: An incoming MOTOtalk call can be terminated at any time by pressing e.

Receive All

You can set your phone to receive MOTOtalk transmissions from any phone that is set to the same channel, regardless of the code (1-15), by setting the code to Receive All. When you receive transmissions with the code set to Receive All, the display changes from Receive All to the code on which the transmission was received.

Tip: You can reply to an incoming call within 6 seconds after hearing the short ending beep by pressing the PTT button.

Note: You cannot initiate a code call when the code is set to Receive All. If you press the PTT button with the code set to Receive All, you will receive an error message.

To set the code to Receive All:

1From the MOTOtalk idle screen, press A under Edit.

2Scroll to Code.

3Press A under Edit.

4Select Receive All.

5When you are finished, press A under Back to return to the MOTOtalk idle screen.

26