3

battery charging

New batteries are not fully charged. Plug the battery

charger into your phone and an

electrical outlet. Your phone might take several seconds to start charging the battery. When finished, your display shows

Charge Complete.

12essentials

Tip: Relax, you can’t overcharge your battery. It will perform best after you fully charge and discharge it a few times.

You can charge your battery by connecting a cable from your

phone's mini-USB port to a USB port on a computer. Both your

phone and the computer must be turned on, and your computer must have the correct software drivers installed. Cables and software drivers are available in

Motorola Original data kits, sold separately.

turn it on & off

Caution: Some phones ask for your SIM card PIN code when you turn them on. If you enter an incorrect PIN code three times before the correct code, your SIM card is disabled, and your display shows SIM Blocked. Contact your service provider.

Page 14
Image 14
Motorola K1 manual Turn it on & off, Battery charging, Charge Complete