Motorola KEM-PK14190-67 = Medium Sensitivity for most environments, QT Noise Filtering, Replaced

Setting the Sensitivity Level When in or Mode Adjusting the radio’s sensitivity level helps minimize the possibility of unintended noises triggering a transmission and helps the radio pick up soft voices.

1.Press until VOX and the level setting (1-3) appear on the display.

2.Press or to select the sensitivity level.

3.Press to set or to continue set up.

3 = High Sensitivity for quiet environments

2 = Medium Sensitivity for most environments

1 = Low Sensitivity for noisy environments

Note: When you connect a headset, the radio is automatically set to the last chosen sensitivity level.

QT Noise Filtering

The QT noise-filtering feature helps to ensure uninterrupted communication with other Motorola radios that have this feature. This feature also filters out unwanted transmissions from other radios. This is useful in places where there is heavy radio traffic, such as amusement parks or ski resorts.

Note: QT noise filtering is not available when the radio is scanning.

To turn QT noise filtering on or off:

1.Press until displays. The current setting On/Off will flash.

2.Press or to turn noise filtering On or Off.

3.Press to confirm your selection or to continue set up.

To transmit to a radio that has QT noise filtering turned on:

1.Select the same channel and Interference Eliminator Code as the other radio.

2.Press to send a call tone. This allows your voice to pass through the QT noise filter on the receiving radio.

3.Press and speak normally.

Note: If you skip step 2, the beginning of your message may not be heard on the receiving radio. For a 30-second period, starting after the last transmission, all transmissions received on the selected channel and code will pass through the QT noise filter.

Note: Radios other than EM1000 series can receive the emergency alert signal but will not respond with adjusted volume settings, controlled transmission mode or unique alert tone. Users of other radios will hear a steady 8 second tone and the 22 second voice transmission.

Warning: The Emergency Alert feature should only be used in the event of an actual emergency. Motorola is not responsible if there is no response to the emergency alert from the receiving group.

Flashlight

Press the flashlight button to turn the light on. The switch functions as a momentary control for the light.

Note: Turn off the light when not in use to conserve battery power.

Keypad Lock

To avoid accidentally changing your radio settings:

1.Press and hold until displays.

2.When in lock mode, you can turn the radio on and off, adjust the volume, receive, transmit, send a call tone, and monitor channels. All other functions are locked.

To unlock the radio, press and hold until is no longer displayed.

Scanning Channels

Use scan to search the 22 channels for transmissions from unknown parties, to find someone in your group who has accidentally changed channels, or to quickly find unused channels for your own use.

There is a priority feature and 2 modes of scanning ( basic and advanced ) to make your search more effective. The basic scan mode uses the channel and code combinations for each of the 22 channels as you have set them ( or with the default code value of 1). The “Advanced Scan” mode will scan all channels for any and all codes, detect any code in use, and use that code value temporarily for that channel.

Priority is given to the “home channel,” that is, the channel (and Interference Eliminator Code) your radio was set to when you start the scan. This means the initial channel (and code setting) is scanned more often than the other 21 channels, and your radio will respond quickly to any activity occurring on the home channel as a priority.

Your radio can tune in to broadcasts by the United States National Oceanic and Atmospheric Administration (NOAA) Weather Radio and Environment Canada Weatheradio.

You can listen to a weather channel (see “Weather Channels and Frequencies” table below) or set your radio to alert you to emergency weather broadcasts that interrupt routine broadcasts. When you listen to a weather channel, you cannot use your radio in scan mode or for two-way communications.

Both NOAA and Environment Canada have transmitters located throughout the United States and Canada, respectively. These transmitters broadcast watches, forecasts, and other information 24 hours a day.

Note: NOAA weather radio stations are assigned to cover specific areas and service may be limited. Please check with your local weather office for frequency and details, or visit www.weather.gov/nwr in the US or www.msc.ec.gc.ca/msb/weatheradio in Canada to view the appropriate transmitter for your area.

The use of the NOAA logo does not provide an endorsement or implied endorsement by NOAA’s National Weather Service, nor does the use of the Weatheradio logo provide an endorsement or implied endorsement by Environment Canada.

Turning Weather Channel Reception On and Off

1.To turn weather reception on, press and hold for three seconds.

2.To turn off, press or turn the radio off and then back on.

Setting the Weather Channel

Your radio receives weather frequencies:

1.After turning weather reception on, press . The current channel flashes.

2.Press or to select the appropriate channel with good reception in your area.

3.Press to save the weather channel setting.

Setting the Weather Alert

Your radio can be set to respond to NOAA Weather Radio emergency messages. A special alarm tone sounds an alert and turns on the weather receiver to give you immediate weather and emergency information.

Warranty

Consumer Two-Way Radio Products and Accessories purchased in the United States or Canada.

What Does this Warranty Cover?

Subject to the exclusions contained to the right, Giant International Ltd. warrants the Motorola branded consumer two-way radios that operate via Family Radio Service or General Mobile Radio Service that it manufactures (“Products”), the Motorola branded or certified accessories sold for use with these Products that it manufactures (“Accessories”) to be free from defects in materials and workmanship under normal consumer usage for the period(s) outlined below. This limited warranty is a consumer’s exclusive remedy, and applies as follows to new Motorola branded Products and Accessories manufactured by Giant International Ltd., and purchased by consumers in the United States or Canada, which are accompanied by this written warranty:

	Products Covered	Length of Coverage	Exclusions
Products and Accessories as		One (1) year from the date of	Normal Wear and Tear. Periodic maintenance, repair and
defined above, unless otherwise		purchase by the first consumer	replacement of parts due to normal wear and tear are excluded
provided for below.		purchaser of the product unless	from coverage.
		otherwise provided for below.	Batteries. Only batteries whose fully charged capacity falls below
1.	Decorative Accessories and	1. Limited lifetime warranty for	80% of their rated capacity and batteries that leak are covered by
	Cases. Decorative covers	the lifetime of ownership by	this limited warranty.
	and cases.	the first consumer purchaser	Abuse & Misuse. Defects or damage that result from: (a) improper
		of the product.
			operation, storage, misuse or abuse, accident or neglect, such as
2.	Monaural Headsets. Ear	2. Limited lifetime warranty for	physical damage (cracks, scratches, etc.) to the surface of the
	buds and boom headsets that	the lifetime of ownership by	product resulting from misuse; (b) contact with liquid, water, rain,
	transmit mono sound through	the first consumer purchaser	extreme humidity or heavy perspiration, sand, dirt or the like, extreme
	a wired connection.	of the product.	heat, or food; (c) use of the Products or Accessories for commercial
3.	Consumer Two-Way Radio	3. Ninety (90) days from the	purposes or subjecting the Product or Accessory to abnormal usage
			or conditions; or (d) other acts which are not the fault of Motorola or
	Accessories.	date of purchase by the first	Giant International Ltd., are excluded from coverage.
		consumer purchaser of the
		product.	Use of Non-Motorola branded Products and Accessories. Defects
4.	Products and Accessories	4. The balance of the original	or damage that result from the use of Non-Motorola branded or
			certified Products, Accessories, Software or other peripheral
	that are Repaired or	warranty or for ninety (90)	equipment are excluded from coverage.
	Replaced.	days from the date returned
		to the consumer, whichever	Unauthorized Service or Modification. Defects or damages
		is longer.	resulting from service, testing, adjustment, installation,
			maintenance, alteration, or modification in any way by someone
			other than Motorola, Giant International Ltd. or its authorized
			service centers, are excluded from coverage.
			Altered Products. Products or Accessories with (a) serial numbers
			or date tags that have been removed, altered or obliterated; (b)
			broken seals or that show evidence of tampering; (c) mismatched
			board serial numbers; or (d) nonconforming or non-Motorola
			branded housings, or parts, are excluded from coverage.
			Communication Services. Defects, damages, or the failure of
			Products or Accessories due to any communication service or
			signal you may subscribe to or use with the Products or
			Accessories is excluded from coverage.

Keypad Tones

You may enable or disable the speaker key tones. You will hear the key tone each time a button is pushed.

1.Press until appears. The current setting On/Off will flash.

2.Press either or to turn On or Off.

3.Press to confirm or to continue set up.

Note: When the key tone feature is off, the following are not disabled:

•Transmit timeout alert tone

•Call tone

•Low battery alert tone or

•The transmitted talk confirmation tone

Transmitting a Talk Confirmation Tone

You can set your radio to transmit a unique tone when you finish transmitting. It is like saying “Roger” or “Over” to let others know you are finished talking.

1.With the radio on, press until the appears. The current setting On/Off flashes.

2. Press or to turn On or Off.

3. Press to set or to quit menu mode.

Special Features

Emergency Alert Mode

The Emergency Alert function can be used to signal others in your group of your need for immediate help. All radios in your group using the same channel and interference eliminator code can receive the message. EM1000 series radios will automatically advance the

To start Scanning:

1.Briefly press the key. The scan will appear in the display, and the radio will begin to scroll through the channel and code combinations.

2.When the radio detects channel activity matching the channel and code combination, it stops scrolling and you can hear the transmission.

3.To respond and talk to the person transmitting, press within five seconds after the end of the transmission.

4.The radio will resume scrolling through the channels five seconds after the end of any received activity.

5.To stop scanning, briefly press the key.

To start Advanced Scanning:

1.Set the Interference Eliminator Code to “zero” or OFF.

2.Briefly press the key. The scan will appear in the display, and the radio will begin to scroll through the channels. No Interference Eliminator Codes will filter what is heard.

3.When the radio detects channel activity with ANY code (or NO code), it stops scrolling and you can hear the transmission. Any Interference Eliminator Code that may be in use by that party will be detected and displayed.

4.To respond and talk to the person transmitting, press within five seconds of the end of the transmission. The radio will transmit using the newly detected Interference Eliminator Code.

5.The radio will resume scrolling through the channels five seconds after the end of any received activity.

6.To stop scanning, briefly press the key.

Scanning Notes:

1.After turning weather reception on, press twice. On/Off displays.

2.Press or to select On/Off. If you activate Weather Alert

and return to two-way mode, will display.

3.Press to save the Weather Alert setting.

4.Press to return to two-way mode.

As with two-way radio reception, weather channel reception depends on how close you are to a transmitter and whether you are indoors or outdoors. Because weather channels are transmitted without codes, they may contain static or noise. Weather Alert will not function while actively transmitting or receiving in two-way mode.

Channels and Frequencies

Channel	Frequency	Description	Channel	Frequency	Description
1	462.5625 MHz	GMRS/FRS	12	467.6625 MHz	FRS
2	462.5875 MHz	GMRS/FRS	13	467.6875 MHz	FRS
3	462.6125 MHz	GMRS/FRS	14	462.7125 MHz	FRS
4	462.6375 MHz	GMRS/FRS	15	462.5500 MHz	GMRS
5	462.6625 MHz	GMRS/FRS	16	462.5750 MHz	GMRS
6	462.6875 MHz	GMRS/FRS	17	462.6000 MHz	GMRS
7	462.7125 MHz	GMRS/FRS	18	462.6250 MHz	GMRS

Who is covered?

This warranty extends only to the first consumer purchaser, and is not transferable.

What will GIANT INTERNATIONAL LTD. do?

GIANT INTERNATIONAL LTD., at its option, will at no charge repair, replace or refund the purchase price of any Products or Accessories that does not conform to this warranty. We may use functionally equivalent reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts.

How to Obtain Warranty Service or Other Information?

To obtain service or information, please call:

USA Two-Way Radios Canada Two-Way Radios

1-800-638-51191-800-638-5119

giantintl@callcenter.com giantintl@callcenter.com

For Accessories, please call the telephone number designated above for the product with which they are used.

You will receive instructions on how to ship the Products or Accessories at your expense, to a GIANT INTERNATIONAL LTD. Authorized Repair Center. To obtain service, you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase; (b) a written description of the problem; (c) the name of your service provider, if applicable; (d) the name and location of the installation facility (if applicable) and, most importantly; (e) your address and telephone number.

What Other Limitations Are There?

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR, REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL MOTOROLA OR GIANT INTERNATIONAL LTD. BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.

Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another.

speaker volume to a loud setting (the maximum rated output level), regardless of the volume control position. A unique alert tone will be emitted from the receiving radios and heard by your group. The alert tone is also emitted from your own radio speaker to attract attention in your vicinity. Any spoken words or incidental sounds will be transmitted to others. EM1000 series radios will be operating in an automatic “hands free” emergency transmission control mode for a total of 30 seconds. For the duration of the emergency alert, your radio will be locked into a transmitting mode and the other EM1000 radios in your group will be locked into a receiving mode to help ensure the receipt of your emergency message.

1.Press and hold the Emergency Alert button for 3 seconds.

2.An alert signal will be transmitted for 8 seconds to alert other receivers.

3.Your voice or incidental sounds will be transmitted for 22 seconds. There is no need to continue to hold the Emergency Alert button or use the PTT button for your message to be transmitted.

4.After 30 seconds your radio will return to normal two-way mode. EM1000 series radios will automatically return to the initial volume setting as controlled by the volume knob. Both the sender and the receiver will again be able to talk to each other using the PTT or VOX methods of transmission control.

1.If you press while the radio is scrolling through inactive channels, the transmission will be on the “home channel”.

Scanning will resume five seconds after the end of your

transmission. You may press the key to stop scanning at any time.

2.If the radio stops on an undesired transmission, you may

immediately resume the scan by briefly pressing or .

3.If the radio repeatedly stops on an undesired transmission, you

may temporarily remove that channel from the scan list by

pressing and holding or for three seconds. You may remove more than one channel in this way.

4.To restore the removed channel(s) to the scan list, turn the radio

off and then back on, or exit and re-enter the scanning mode by

pressing .

5.You cannot remove the home channel from the scan list.

6.In Advanced Scan, the detected code will only be used for one transmission. You must note the code, exit scan, and set that detected code on that channel to permanently use the detected code.

8	467.5625 MHz	FRS	19	462.6500 MHz	GMRS
9	467.5875 MHz	FRS	20	462.6750 MHz	GMRS
10	467.6125 MHz	FRS	21	462.7000 MHz	GMRS
11	467.6375 MHz	FRS	22	462.7250 MHz	GMRS

Weather Channels and Frequencies

Weather		Weather
Channel	Frequency	Channel	Frequency
WX1	162.550 MHz	WX7	162.525 MHz
WX2	162.400 MHz	WX8	161.650 MHz
WX3	162.475 MHz	WX9	161.775 MHz
WX4	162.425 MHz	WX10	161.750 MHz
WX5	162.450 MHz	WX11	162.000 MHz
WX6	162.500 MHz

Patent and Copyright Information

Manufactured, distributed or sold by Giant International Ltd., official licensee for this product. Motorola, the Stylized M Logo, and other Motorola trademarks and trade dress are owned by Motorola, Inc. and are used under license from Motorola, Inc. MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. ©Motorola, Inc. 2008. All rights reserved.

Please contact customer service at 800-638-5119 or e-mail us at giantintl@callcenter.com for questions/ comments, warranty, support or service related to this product.

EM1000