Motorola MOTO-L802, L804 Setting the announcement mode, Setting the number of rings, Announcement

3.21.3 Setting the announcement mode

1.Press MENU and then VOL+ or REDIAL/VOL- to select

ANSWER MACHINE.

2.Press MENU and then VOL+ or REDIAL/VOL- to select

ANSWERER MODE.

3.Press MENU and then VOL+ or REDIAL/VOL- to select the announcement modes:

•ANNC & RECORD invites your callers to leave a message.

•ANNOUNCE ONLY lets callers hear your announcement but they cannot leave a message.

4.Press MENU to save.

3.21.4 Setting the number of rings

1.Press MENU and then VOL+ or REDIAL/VOL- to select

ANSWER MACHINE.

2.Press MENU and then VOL+ or REDIAL/VOL- to select

# OF RINGS.

3.Press MENU and then VOL+ or REDIAL/VOL- to select the rings to answer. (4 options are available: TOLL SAVER,

3, 4, or 5 RINGS).

4.Press MENU to save.

NOTE

If the Toll Saver setting is selected, the answering machine will pick up after two rings if there are new messages, and after four rings if there is no message.

3.21.5 Announcement

This is the message your callers hear on the answering machine. There are two pre-recorded outgoing messages, or you can record your own.

3.21.5.1 Recording the announcementt

1.Press MENU and then VOL+ or REDIAL/VOL- to select

ANSWER MACHINE.

2.Press MENU and then VOL+ or REDIAL/VOL- to select

ANNOUNCEMENT.

3.Press MENU to select RECORD.

4.Press MENU and then VOL+ or REDIAL/VOL- to select

the answer mode ANNC & RECORD or ANNOUNCE ONLY.

5.Press MENU to start recording after the beep.

6.Press MENU again to stop recording and save the message. The just saved message is played automatically.

Using the Phone 23