9-2
Symbol LS9208 Product Reference Guide
Connecting Using Wand Emulation
To perform Wand Emulation, connect the scanner to a portable data terminal, or a controller
which collects the wand data and interprets it for the host.
Figure 9-1. Wand Emulation Connection
1. Connect the Wand Emulation interface cable to the rear of the scanner, as
described in Installing the Interface Cable on page 1-3.
2. Connect the other end of the interface cable to the W and port on the port able dat a
terminal or controller.
3. Scan the appropriate bar codes in this chapter to configure the scanner.
Interface cable
Wand port
Portable data
Terminal