Setting the Alarm

The alarm on your message receiver can be set for a specific time and date, or it can be used as a daily alarm.

To set the alarm for a specific time and date:

Press ç to display the function menu.

Press Š to move the cursor to .

Press ç to display the set-time-and-alarm screen. Press to move the cursor to .

22:23™05/06/96 Ì0:00™--/--/--

SET ALARM

Example of Set-Time-and-Alarm Screen

The alarm symbol defines the alarm status -- either alarm enabled (c) or alarm disabled (Ì).

Press to move the cursor to .

Press

or

to enable or disable the alarm.

Press to move the cursor to the hour digit.

Repeat the process for each entry (minute, AM/PM, and date).

Press ç to activate your selection. The symbol is shown on the display.

At the selected time, your message receiver emits a 12-second audible alert even if the message receiver is in the silent mode.

To set the alarm to alert daily:

Follow the steps previously described, except when setting the date, press for the date entries until you see a blank month, day, and year (--/--/--). The alarm is now set to alert every day at this specified time.

NOTE: If the alarm expires without being acknowl- edged, the symbol flashes until one of the message receiver buttons is pressed.

8

Page 10
Image 10
Motorola FLX4 manual Setting the Alarm, To set the alarm for a specific time and date, To set the alarm to alert daily