Setting the Alert Mode
The alert can be set as either audible or silent.
➊Press ç to display the function menu.
➋ Press Š to move the cursor to ƒ or Î.
The ƒ symbol is displayed if the message receiver is in the silent alert mode (prompting you to enter the audible mode, if desired). The Îsymbol is displayed if the mes- sage receiver is in the audible alert mode (prompting you to enter the silent mode, if desired).
➌Press ç to select the desired alert mode.
If the selected mode is audible (ƒ), your message receiver emits a short chirp. If the selected mode is silent (Î) and your message receiver is equipped with a vibra- tor, your message receiver vibrates.
Setting the Alert Pattern
NOTE: The message receiver must be in the audible alert mode to select the alert pattern.
Your message receiver has a standard alert (1), seven dif- ferent pleasing alerts (2 through 8), and a chirping alert (Í), allowing you to select and change the alert.You can also select no alert (Î).
To change your alert:
➊Press ç to display the function menu.
➋Press Š to move the cursor to é, then press ç.
➌ Press Š or ‹ to move the cursor to the desired alert.
The message receiver gives a sample of each alert when scrolling through the selections.
10
