Overview of your Parent unit
1
6 | 2 |
3
5 | 4 |
1Sound Level LED
3 GREEN and 2 RED LEDs turn on and off in real time to indicate the noise level in baby's room. When audio is being picked up by microphone of baby unit, the LEDs light up to in indicate audio level with reference to the sensitivity setting. The more LEDs light up, the stronger the sound is.
If no LED lights up it means the sound level in baby's room does not exceed the thresholds set through the parent unit.
The LEDs are also used for indicating the speaker volume setting on parent unit. The louder you set the speaker volume, the more LEDs light up.
2Link Indicator
On when the parent unit is powered on and linked to the baby unit.
Flashes when the parent unit is out of range from baby unit.
Off when the parent unit is powered off.
3Power
Press and hold to power on/off the parent unit.
4Volume +
Press to increase the speaker volume.
5Volume -
Press to decrease the speaker volume.
6Charging Indicator
On steadily when in charging mode. Flashes when low battery is detected.
NOTE
Off even if connected with power adapter but without battery pack installed.
