6. TROUBLESHOOTING
Link light on the parent unit does not come on
•Check whether the parent unit is powered on.
•Check whether the supplied battery pack is correctly installed and that it is not drained.
•Recharge the parent unit by connecting it to the power supply.
Link light on the parent unit flashes
•The parent unit and the baby unit may be out of range with each other. Reduce the distance between the units, but not closer than 1.5 metre.
•The baby unit may be switched off. Press and hold 0 key to switch on the baby unit.
Low battery light on the parent unit flashes
•Battery pack in the parent unit is running low. Connect the parent unit to the mains power with the supplied power adaptor for recharging.
The parent unit beeps
•Lost connection with the baby unit. Reduce the distance between the parent unit and the baby unit, but not closer than 1.5 metre.
•The baby unit may be switched off. Press and hold 0 key to switch on the baby unit.
•Battery pack in parent unit is running low. Connect the parent unit to the mains power with the supplied power adaptor for recharging.
Cannot hear sound or baby cry from the parent unit
•The volume level in the parent unit may be set too low, increase the volume level of the parent unit. Refer to section 3.3 for volume level settings.
•The parent unit and the baby unit may be out of range with each other. Reduce the distance between the units, but not closer than 1.5 metre.
The baby monitor system produces a high- pitched noise
•The parent unit and the baby unit are too close to each other. Make sure the parent unit and baby unit are at least 1.5 metre away from each other.
•The speaker volume of the parent unit maybe set too high. Decrease the volume of the parent unit.
Battery pack in the parent unit is running low quickly
•The volume level of the parent unit may be set too high which consumes power. Decrease the volume level of the parent unit. Refer to section 3.3 for volume level settings.
TROUBLESHOOTING | 11 |
|
|
