Getting Started, Battery Safety Instructions | Motorola MD7090

Getting Started

Before you can use your telephone to make or answer calls, you must charge the battery. This section provides the step-by-step instructions you will need.

Battery Safety Instructions

• Do not burn, disassemble, mutilate, or puncture the battery. The battery contains toxic materials that could be released, resulting in injury.

UNCONTROLLED
•	Caution: There is a risk of explosion if you replace
	the battery with an incorrect battery type. Use only the
	battery that came with your phone or an authorized
	replacement recommended by the manufacturer.
•	Keep batteries out of the reach of children.
•	ContactDOCUMENTyour local recycling center for proper disposal
•	Remove batteries if storing over 30 days.
• Do not dispose of batteries in fire, which could result
	in explosion.
•	The rechargeable batteries that power this product
	must be disposed of properly and may need to be
	recycled. Refer to your battery’s label for battery type.
	methods.
	Getting Started

1

Image 21

Motorola MD7090 manual Getting Started, Battery Safety Instructions

Contents

Uncontrolledocumentd Uncontrolleddocument Welcome Expansion Handset OverviewCongratulations on your purchase of a Motorola product Soft KeysDOCUMENT Base Station Controls Iii Canada TTY Text Telephone Welcome Table of Contents Contents Quick Enable Message Forwarding Screening Calls Motorola Limited WarrantyVii Important Safety Instructions Operate this phone using only the power source Do not install this product near a bath tub, sinkUnsure of the power supply to your home, consult Your dealer or local power company Safety Info Notification of Local Telephone Company FCC InformationOn the bottom of this equipment is a label that contains Among other information, a product identifier in the form Xii Rights of the Telephone Company This device complies with Part 15 of the FCC Rules Interference InformationOperation This equipment has been tested and found to comply Xiv Hearing Aid Compatibility Industry Canada IC Information UNCONTROLLEDmet Privacy Xvii Xviii Getting Started Battery Safety Instructions Charging the Battery UNCONDOCUMENTCharge LEDTROLLEDcharging Installing Backup Batteries Installing the Corded Handset When the speakerphone is on, Vdisplays Using the Phone DisplayTelephone Overview Main display Menu display Using the Navigation Key Using the Soft Keys Installation Installing the Phone on a DeskYou can install the base unit on a desktop or mount it to Mounting Release Bracket button Installing the Phone on the Wall Into an electrical outlet Plug the power cord into the back of the basePlug the telephone line cords for Line 1 and Line Into the jack on the back of the phone. Line 1 = Uncontrolleddocument Personalizing Your New Telephone System Setting Up Setting Key Beeps On or Off Setting the Ring Tone and Ring Volume Scroll down to Ring Tone, to select the ring tone for Setting the Ring Tone Enter the name you want to use up to Naming a Handset or Base Unit First letter of the entry is an uppercase letter. o Uncontrolled Setting the Date and Time for Your Telephone Setting the Language Making a Call Using the PhoneEnding a Call Answering a Call Document Adjusting the Volume During a Call Press Dial softkey Using Automated DialingRepeat steps 1 and 2 as often as necessary to Complete your transaction Using the Speakerphone Volume up or volume down key. These keys areMuting a Call Redialing a Number Putting a Call on Hold Storing a New Number Using the Phonebook First letter of the entry is an uppercase letter. o Press *. a flashing square indicates that you areScroll down To be made Scroll down Storing a Recently Called NumberTo set the tones for incoming calls from this Select HANGE. Stop at the ring tone you want to set Editing a Phonebook Entry Storing a Caller ID Number Deleting a Phonebook Entry Reset to its previous list orderSorting the Phonebook Phonebook entries are stored in the order in which Using Caller ID Calling a Number from the PhonebookReviewing the List of Caller ID Calls Deleting Caller ID Calls Canada, check website for local retailers Multihandset Functions Registering an Expansion Handset Deregistering an Expansion HandsetTo all voice mail messages, if necessary, to clear Using the Intercom After three rings Enabling Auto-AnswerSelect H LD Transferring Calls to Other Handsets Creating a Conference Call with Lines 1 Conference Calling If you only have one additional handset, pressing Monitoring a RoomIntercom automatically pages the handset Speaker is turned off Answering Machine Overview Using the Answering Machine Setting Voice Prompts Setting Up the Answering MachinePress Menu Scroll to and select ANS Mach Setup Press Select Turning the Answering Machine On or Off Setting Recording Quality Setting Up Your Outgoing MessageRecording an utgoing Message OG Changing the Outgoing Message Press Menu Scroll to and select ANS Mach SetupScroll to and select Ring number Scroll to the desired number of rings 3, 4, 5, 6, or Setting the Security ID Number Recording a MemoChecking Messages from the Base Unit Scroll to and select Messages Checking Messages from a Handset 1 Select Menu Machine on/off Checking Messages RemotelyPress 5 to record a memo Press 7 to repeat the menu Message Forwarding Scroll to and select Forward ON/OFF Select Enable Press Done Screening Calls Quick Enable Message Forwarding Uncontrolleddocument Machine Answering What Does this Warranty Cover? Motorola Limited Warranty Exclusions Who is Covered What Other Limitations Are There? Mgbi