English
14 Getting Started
Before VCR Operation

On-Screen Display (OSD)

The On-Screen display provides feedback on the current sta-
tus of the DVD+VCR.
❶❷ ❸ ❹❺
❻❼
❶TAPESPEED DISPLAY
Shows the current tape speed.
❷FUNCTION DISPLAY
Indicates playback function status.
❸HI-FI DISPLAY
Indicates when unit is playing back tape recorded in Hi-Fi.
❹CHANNEL DISPLAY
I
ndicates the selected channel (or LINE1, LINE2 input mode).
❺STEREO/SAP DISPLAY(MONO is not displayed)
Shows the type of audio signal received by the VCR tuner.
❻DATE DISPLAY
Shows the current date.
❼CLOCK/COUNT/REMAIN DISPLAY
Shows the current time, tape counter and remaining time on the
tape.
Each press of the OK button changes the TV screen in the
following sequence.
Notes
"Function displays remain on the TV screen for 5 seconds.
"Clock (or tape counter, tape remaining) mode will continue until
you press OK.
"Tape counter and remaining tape length indicator appear only
when a cassette is inserted. Also, the remaining tape length indica-
tor appears after any tape operation.
EASY INFORMATION
If Extended Data Service (XDS) signals are provided along
with normal TV signals in your area (or with playback of a
tape recorded with Extended Data Service (XDS) signals),
the station ID, program title and program details are shown
on the TV screen.
When viewing a channel with Extended Data Service (XDS) sig-
nals, press OK and the station ID will appear on the TV screen.
Press OK again to view program details, etc.
When viewing a tape recorded with Extended Data Service
(XDS) signals, press
OK
twice and the program title and
program details will appear on the TV screen.
PROGRAM DETAILS
LENGTH: Indicates the run length of a program.
TIME REMAINING: Indicates the remaining time of a
program.
RATING: Indicates the rating of the current program (N/A,
G, PG, PG-13, R, NC-17, X and Not Rated). The rating N/A
means that the motion picture ratings are not applicable to
this program.

Setting the On-Screen Display

The VCR's on-screen menu system allows you to set the
clock, channels, timer recordings, and other setup options.
Menu Selection
Follow these steps to access the VCR's on-screen menu
system.
11
Press SYSTEM MENU and the MAIN menu will
appear.
22
Select the desired menu using the v/Vbuttons
and then press
OK
.
Note
Menus remain on-screen for 3 minutes.
33
Press SYSTEM MENU when finished.
PLAY HI-FI CH 4
SP STEREO
OCT 8 , FRI 2:15 PM
REM 1:58
0:35:40
2:15 PM
STOP CH 4
SP STEREO
OCT 8 , FRI 2:15 PM
Easy Information Screen
(Program details)
Easy Information Screen
(Station ID)
CH 4
SP WABC STEREO
“Home video”
OCT 8 , FRI 2:15 PM
PROGRAM DETAILS
“Home video”
LENGTH 01:00
TIME REMAINING 00:26
RATING N/A
CLOCK SET (page 16)
PROGRAM (page 22)
TUNING (page 15)
SETUP (page 15)
MAINMENU