English
22 Operation
Normal Recording
Preparation:
"Turn on the power for both the DVD+VCR and TV.
"Tune the TV to the DVD+VCR output channel (CH 3 or 4) or set
the TV’s source selector to VIDEO (if using Video Inputs).
"If a direct VIDEO/AUDIO connection is made between the
DVD+VCR and the TV, set the TV’s source selector to correct
VIDEO mode.
11
Insert a video cassette with the safety tab intact.
22
Select the desired channel by using vv/VV.
"If you are recording from another source via audio/video
input jacks (at the Rear or Front panel), select the LINE1 or
LINE2 by pressing INPUT.
33
Set the desired recording speed (SP or SLP) by
pressing SPEED.
"This DVD+VCR is not designed to record in LP mode.
44
Set the MTS mode as desired (See page 15, 25).
55
Press REC/ITR (zz) once.
Recording will start. (The REC indicator will light in the
display window.)
"REC indicator appears only when the Output Source is set
to VCR.
"If a cassette with no safety tab is loaded, the cassette will be
ejected automatically.
66
Press STOP (xx) to stop recording.
If the tape reaches the end of its playback, the DVD+VCR will
automatically stop, rewind, eject, and turn itself off (Functions
only with no disc in unit).
To pause the recording
1Press PAUSE/STEP (X) to pause the tape during
recording.
The REC indicator will flash in the display window.
2When you want to continue recording, press
PAUSE/STEP (X) or press REC/ITR (zz).
"After 5 minutes in pause mode, the unit will stop automatically
to protect the tape and the video heads.
To record one TV program while watching another
1Press TV/VCR to select the TV mode during recording.
The TV indicator appears.
2Using the TV, select the desired channel to be viewed.
Tips
Always use PAUSE/STEP (X) for the best results when making
changes during recording.
For example: To change channels during recording, first press
PAUSE/STEP (X) to put the unit in pause mode. Then select the
desired channel on the DVD+VCR, and press PAUSE/STEP (X)
again to resume recording.
Timer Recording
This DVD+VCR can be programmed to record up to 8 pro-
grams within a period of 1 year. For unattended recording,
the timer needs to know the channels to be recorded and the
program start and end times.
Preparation:
"Turn on the power of both the DVD+VCR and the TV.
"
Be sure the TV is set to the DVD+VCR output channel (3 or 4).
"Make sure the TUNING BAND in the TUNING menu is set cor-
rectly (TV or CATV).
11
Press SYSTEM MENU and the MAIN menu will
appear.
22
Use vv/VVto choose the PROGRAM menu.
33
Press OK to go to the PROGRAM menu.
The PROGRAM menu will appear.
"If all programs had been entered, ‘FULLYPROGRAMMED’
message would appear, and then PROGRAM 1 would show
on the TV screen.
44
Use bb/BBto choose the PROGRAM No. (1-8).
55
Use VVto choose the MONTH option.
Use bb/BBto choose the desired month.
66
Use VVto choose the DAY option.
Use bb/BBto choose the desired day.
77
Use VVto choose the START option.
Use bb/BBto choose the desired start time.
88
Use VVto choose the STOP option.
Use bb/BBto choose the desired stop time.
99
Use VVto choose the CHANNEL option.
Use bb/BBto choose the desired channel (Channel,
LINE1 or LINE2).
Cable Users:If you have CABLE TV and used a Cable Box in
Connecting to the DVD+VCR, you must set the channel to
match the cable box output channel (usually CH 3 or 4). Select
or change channels on the cable box instead of on the
DVD+VCR.