BD1217 ME4251 user guide [5] 7/7/05 1:20 pm Page 9
Connecting the Base Station and Mains Adaptor
1. Feed the mains power adaptor cord and the telephone line cord through the small hole in the base stand as shown.
2. Insert the telephone line cord into the corresponding socket on the base station.
3. Connect the mains power adaptor plug in the corresponding socket on the underneath of the base station.
4. Attach the base stand to the main part of the base:
Insert the 2 small plastic tabs on the stand into the 2 upper slotson the base (as shown).
Holding the stand with one hand on each of
the 2 clips, gently squeeze the clips inwards and down into the lower slots on the base (as shown). The stand will click into place. Check the stand is secure before placing on your chosen surface.
5.Connect the mains power adaptor to the mains wall socket and switch the power on.
6.Connect the telephone line cord to the telephone socket. The base station is now ready for use.
Note: The base station does not have a power switch.
Only use the mains adaptor supplied with your phone.
Installation
9
